Three myths stop contract manufacturers from filing when a distributor refuses to pay, and an MSME Samadhaan dispute filing lawyer hears them every month. Myth one: Samadhaan is only for undisputed dues, so once the buyer raises a quality complaint the door is closed. Wrong. The Facilitation Council exists to decide disputes. A buyer's objection is something to answer, not a bar to filing.
Myth two: a quality complaint stops the 45-day clock for good. Also wrong. Under the MSMED Act, only a written objection made within fifteen days of delivery prevents deemed acceptance, and even a timely objection is tested on its merits. Myth three: filing is a single act, after which you wait. In reality, a disputed claim is filed in stages: the application, the reply to the buyer's objections, the statement of claim if conciliation fails, a rejoinder and the evidence. Each stage needs its own documents. Manufacturers who want those stages handled properly can hire Advocate BK Singh for MSME, recovery, commercial and arbitration cases.
Key facts at a glance
- A disputed bill can still be filed on Samadhaan; the council decides the dispute.
- Only written objections within 15 days of delivery prevent deemed acceptance.
- Filing happens in stages, each with its own documents and deadlines.
- Retained samples and batch records are the manufacturer's best defence on quality.
- Interest at 17.25% a year keeps compounding while the dispute is pending.
- Silpi Industries allows counterclaims and applies the Limitation Act to these cases.
What Does an MSME Samadhaan Dispute Filing Lawyer Do?
The lawyer prepares and files a delayed-payment claim where the buyer has already raised objections. That means checking eligibility, preserving evidence before it disappears, structuring the application so it meets the objections head-on, managing each filing stage before the council, and avoiding errors that lead to delay or rejection. The focus is procedure, with the dispute in mind from the first page.
Filing an undisputed claim is mostly arithmetic. Filing a disputed one is closer to litigation from day one. A distributor that has sent a letter alleging that three batches failed assay will repeat that allegation at conciliation and expand it in arbitration. The filing must anticipate that, so the council sees the manufacturer's answer alongside the claim.
A dispute filing lawyer also controls the sequence. Some documents should go in with the application. Others are better held for the statement of claim, where they can be explained in detail. Some, such as an internal investigation report, may need careful review before they are relied on at all, because they could contain admissions the distributor would use. Getting that sequence right matters as much as getting the figures right.
For a general introduction to the filing process, see our page on the MSME Samadhaan filing process. This page goes further into disputed claims.
Can You File on Samadhaan When the Buyer Disputes Quality?
Yes. A dispute about quality, quantity or price does not prevent a Samadhaan filing. The council conciliates and, if that fails, arbitrates the dispute and decides how much is payable. What matters is whether the buyer's objection was timely and whether it is supported by evidence, both of which the council examines.
The explanation to Section 2(b) of the MSMED Act provides that goods are deemed accepted if the buyer does not object in writing within fifteen days of delivery. A distributor that received a batch, released it into the market and complained four months later about a stability result has a weak case on acceptance. A distributor that rejected a batch in writing within a week, with a test report, has a stronger one.
Even then, a timely objection does not end the matter. The council will ask whether the test was done properly, on which sample, in which laboratory, and whether the manufacturer's own certificate of analysis and retained sample tell a different story. Contract manufacturing disputes often come down to competing test results, and the side with better records usually prevails.
The one situation where filing is pointless is where the manufacturer itself accepts that the batches failed and has no answer. In that case, filing for those batches wastes time and harms credibility on the rest of the claim. A good dispute filing lawyer will say so plainly and leave those invoices out.
Is a Pharma Contract Manufacturer Eligible to File?
A contract manufacturer that is a micro or small enterprise, registered on Udyam before the supply orders, and that manufactured the goods it supplied is eligible. It does not matter that the distributor or marketing company owns the brand or holds a loan licence. What matters is that the manufacturer made the product and billed the buyer for it.
Check these points before filing:
- Category. Micro: investment up to ₹2.5 crore and turnover up to ₹10 crore. Small: up to ₹25 crore and ₹100 crore. These are the limits from April 2025. Plants with significant equipment investment should check the investment figure carefully.
- Registration date. Silpi Industries (2021) tied protection to registration before the contract. Compare the Udyam date with the supply agreement and each purchase order.
- Manufacturing activity. Products made in the manufacturer's own facility qualify. Products sourced from another plant and resold under the manufacturer's invoice are trading, and generally outside the Act.
- The buyer. Distributors, marketing companies and brand owners are all buyers under Section 2(d). Name the exact legal entity on the purchase order.
Free-issue materials need attention. Some marketing companies supply the active ingredient or printed packaging material and pay the manufacturer a conversion charge. That conversion charge is still payment for manufacturing, and it qualifies. The claim should be framed around what the manufacturer actually billed, not the full value of the finished product.
What Must Be Preserved Before Filing a Disputed Claim?
Preserve batch manufacturing records, certificates of analysis, retained or control samples, dispatch and transport records, the buyer's acknowledgements, test reports from both sides and all correspondence about the objection. In quality disputes, evidence that is lost before filing cannot be recreated, and the buyer's version may then go unanswered.
Retained samples are the most important item. A manufacturer's quality system normally keeps samples of each batch for a set period. If the distributor alleges that a batch failed, a retained sample tested in an independent laboratory may show otherwise. Make sure those samples are not destroyed under routine disposal schedules once a dispute has started. Write an internal instruction to hold them, and keep a copy of that instruction.
Batch records come next. The batch manufacturing record, the in-process checks, the finished product test results and the release certificate together show that the batch met specification when it left the plant. If the distributor's complaint relates to storage after delivery, such as stability failure caused by poor warehouse conditions, these records help show where the problem arose.
Transport and storage evidence matters for temperature-sensitive products. Lorry receipts, temperature logs where kept, and the distributor's own goods receipt notes help establish the condition of goods on arrival. If the distributor signed the receipt without remarks, that signature supports deemed acceptance.
Practical tip: the moment a distributor alleges a quality failure, ask in writing for the test report, the sample identity and the laboratory used, and offer a joint test on retained samples. A distributor that refuses a joint test weakens its own objection, and that refusal will be useful at the council.
What Should the Demand Notice Say Before a Disputed Filing?
The notice should list each invoice with its delivery date, state that no written objection arrived within fifteen days or that the objection came late, deal briefly with any objection already raised, offer a joint test on retained samples, quote the statutory interest and give a short deadline. It sets the record the council will read first.
In a disputed matter, the notice does two jobs. It demands payment, and it fixes the manufacturer's answer to the quality allegation in writing before the distributor's lawyers shape the story. A notice that ignores the complaint looks evasive. A notice that answers it in a few calm sentences, with batch numbers and release dates, looks confident.
Keep it short. Two pages are usually enough. Long technical arguments belong in the statement of claim, where they can be supported by documents and, if necessary, a witness. The notice should also separate the undisputed invoices clearly and ask for those to be paid at once, which tests the distributor's good faith.
Avoid admissions. Phrases like “we regret the failure” or “we accept responsibility for the deviation”, often written by a well-meaning sales head, will be quoted back at the council. Manufacturers who have already sent such emails usually hire Advocate BK Singh before the notice goes out, so that the formal record is consistent and the earlier messages are placed in context. Our page on MSME legal notices for payment recovery covers notice drafting in more detail.
How Is a Disputed Claim Filed, Stage by Stage?
A disputed claim moves through seven stages: evidence preservation, demand notice, online application, response to the buyer's objections at conciliation, statement of claim if arbitration begins, rejoinder to the buyer's defence and counterclaim, and evidence. Each stage has its own documents, and missing one weakens the next.
- Preserve and assemble. Hold retained samples, collect batch records, certificates of analysis, dispatch documents and the buyer's complaint letters. Prepare an internal chronology.
- Send a demand notice. Set out the amount due, the dates of delivery and the absence or lateness of written objections. Offer a joint test on any disputed batch.
- File the online application. Enter the manufacturer's Udyam details, the buyer's legal name and address, and invoice-wise amounts. Upload the core documents: purchase orders, invoices, dispatch records and the notice.
- Respond at conciliation. Present a short written note answering each objection the buyer has raised, with supporting test results and dates.
- File the statement of claim. If conciliation fails, file a full pleading with an indexed compilation, including batch records and expert or laboratory evidence where needed.
- File the rejoinder and reply to counterclaim. Answer new allegations, and raise limitation or causation objections to any counterclaim.
- Lead evidence. File affidavits from the quality head or plant manager, and attend cross-examination if the council allows it.
The government portal does not charge for filing the application. The legal work lies in preparing what is filed and in managing the later stages, which is where disputed claims are won or lost.
Which Documents Are Needed at Each Filing Stage?
At the application stage, file the purchase orders, invoices, dispatch records, the demand notice and the Udyam certificate. At conciliation, add a note answering objections. At arbitration, add batch records, certificates of analysis, test reports, retained sample results and witness affidavits. The table maps documents to stages.
| Filing stage | Documents to file | Purpose |
|---|---|---|
| Online application | Udyam certificate, purchase orders, invoices, e-way bills, lorry receipts, demand notice | Establish eligibility, supply and amount due |
| Conciliation | Short objection-reply note, certificates of analysis, buyer's acknowledgements | Show the council the answer to each objection |
| Statement of claim | Supply agreement, quality agreement, batch records, release certificates, interest computation | Prove the claim in full |
| Rejoinder | Retained sample test results, joint test correspondence, storage evidence | Rebut quality allegations and counterclaim |
| Evidence | Affidavits of quality head and dispatch in-charge, certificates for electronic records | Prove documents and explain technical matters |
The quality agreement deserves special mention. Many contract manufacturing relationships have a separate quality agreement that sets out testing responsibilities, specifications, release procedures and how out-of-specification results are handled. If the distributor did not follow the agreed procedure before rejecting a batch, that failure is a strong point for the manufacturer.
How Should Quality Objections Be Answered in the Filing?
Each objection should be answered with dates and documents: when the batch was delivered, when the objection came, what the buyer's test showed, what the manufacturer's certificate and retained sample show, and whether the buyer used or sold the goods. The answer should be factual and calm, not argumentative.
| Distributor's objection | Manufacturer's answer | Key evidence |
|---|---|---|
| Batch failed assay in our laboratory | Batch met specification at release; buyer's test not on retained sample | Certificate of analysis, retained sample test, joint test offer |
| Stability failure at six months | Storage conditions after delivery were the buyer's responsibility | Stability data, quality agreement, storage evidence |
| Regulator declared a sample not of standard quality | Identify the batch and sample, and whether the result has been contested | Official test report, batch records, any challenge filed |
| Near-expiry stock returned from market | Shelf life was as agreed; slow sales are a commercial risk of the buyer | Purchase order, shelf life specification |
| Packaging material wasted due to MRP change | The buyer changed the artwork after approval | Artwork approvals and change emails |
| Free-issue API reconciliation shortfall | Consumption within agreed yield norms | Material reconciliation statements, yield clauses |
Regulatory findings need careful handling. If a drug inspector's sample from the market was reported as not of standard quality, the distributor will rely on that heavily. The manufacturer must check whether the sample relates to the batch in question, whether storage in the supply chain could explain the result, and whether the report has been or can be contested under the applicable procedure. Treat this with the seriousness it deserves; it is not just a payment issue.
Near-expiry returns are a commercial matter, not a quality one. A distributor that ordered more than it could sell cannot push the stock back to the manufacturer unless the contract allows returns. Ask for the return clause, if any, before conceding anything.
Why Are Disputed Filings Rejected or Delayed?
Disputed filings are most often delayed or rejected because the Udyam date is after the order, traded products are mixed with manufactured ones, the buyer entity is wrongly named, invoice amounts do not match the ledger, documents are missing or illegible, or the claim includes invoices beyond limitation. A disputed filing also stalls when the manufacturer has no answer ready for the buyer's objections.
The common errors, listed plainly:
- Filing for batches that the manufacturer itself knows failed, which damages credibility on the rest.
- Claiming the full finished product value when the manufacturer billed only a conversion charge.
- Ignoring credit notes the manufacturer issued for returns or rate adjustments.
- Naming the brand owner when the purchase orders came from a separate distributor company.
- Uploading batch records in bulk without an index, so the council cannot find the relevant page.
- Missing limitation on older invoices, especially in long relationships with rolling balances.
Limitation deserves emphasis. The Supreme Court in Silpi Industries held that the Limitation Act applies to council arbitration. A manufacturer with a running account that has not been reconciled for years may find that the oldest invoices are time-barred unless acknowledged in writing or kept alive by part payments. Check balance confirmations and emails for acknowledgements before filing.
How Much Interest Accrues While the Dispute Is Pending?
Interest keeps running under Section 16 throughout the dispute, compounded monthly at three times the RBI Bank Rate. With the Bank Rate at 5.75% from 7 October 2026, the rate is 17.25% a year, or 1.4375% a month. On ₹14,14,500, interest after one year is ₹2,64,248, rising each month the buyer delays.
Taking ₹14,14,500 as the disputed balance, six months add ₹1,26,470 to reach ₹15,40,970. After eighteen months interest is ₹4,14,344. Two years of dispute would bring the total to ₹19,92,360, with ₹5,77,860 of interest.
| Period after the due date | Growth factor | Interest (₹) | Total due (₹) |
|---|---|---|---|
| 6 months | 1.0894 | ₹1,26,470 | ₹15,40,970 |
| 12 months | 1.1868 | ₹2,64,248 | ₹16,78,748 |
| 18 months | 1.2929 | ₹4,14,344 | ₹18,28,844 |
| 24 months | 1.4085 | ₹5,77,860 | ₹19,92,360 |
Principal ₹14,14,500. Interest compounded monthly at three times the RBI Bank Rate (5.75% from 7 October 2026), that is 17.25% a year or 1.4375% a month. Check the Bank Rate in force for your period.
That growing figure gives the manufacturer weight in conciliation. A distributor that believes it has a quality argument on one batch may still settle the remaining invoices quickly once it sees the interest accumulating on the undisputed part. Separating disputed from undisputed invoices in the filing makes this easier.
If the council finds that some batches were validly rejected, interest on those invoices falls away, but interest on the rest continues. Compute interest invoice by invoice so the council can adjust the figure precisely. Section 23 also denies the buyer a tax deduction for the interest. More on the method is on our page about MSME delayed payment interest.
What Happens After Filing: Conciliation, Arbitration and Award?
After filing, the council issues notice and takes up conciliation under Section 18(2). If conciliation fails, the council arbitrates or refers the dispute to an institution under Section 18(3). The award binds the parties, and a buyer challenging it under Section 34 must first deposit 75% under Section 19. An unchallenged award is enforced under Section 36.
In disputed pharma matters, conciliation often turns on whether the parties can agree a joint test. If they can, the result frequently settles the dispute. If the distributor refuses, the conciliator may note that refusal, and the manufacturer can rely on it in arbitration.
Arbitration then proceeds on pleadings and evidence. The distributor may counterclaim for recall costs, lost sales or regulatory penalties. Silpi Industries confirmed that counterclaims are maintainable. Each element of a counterclaim needs proof, and many recall cost claims are inflated or poorly documented. The manufacturer's quality head will usually be the key witness.
Section 18(4) allows the manufacturer to file before the council where it is located. A plant in Himachal Pradesh or Uttarakhand supplying a distributor in Delhi can file before its own state's council. Our team appears before the councils for Delhi, Uttar Pradesh and Haryana, and works with associate advocates elsewhere. For more on council procedure, see our page on MSEFC arbitration and conciliation cases.
How Does a Samadhaan Dispute Filing Compare With Other Routes?
For an eligible manufacturer, a Samadhaan filing gives statutory interest and the 75% deposit rule. A commercial suit allows detailed expert evidence and interim relief but requires Section 12A mediation first. Private arbitration under the supply agreement suits technical disputes needing a specialist. A Section 138 complaint applies only to bounced cheques.
For disputes that turn heavily on complex scientific evidence, some manufacturers prefer a forum where experts can be examined at length. Councils can hear expert evidence, but their procedure is generally lighter. The choice depends on how central the technical dispute is to the overall claim. Where most invoices are undisputed and only a few batches are in question, the council route is usually best.
Distributors that issued post-dated cheques for past supplies sometimes stop them when a quality dispute arises. If a cheque is dishonoured, a Section 138 complaint is available for the cheque amount, subject to the strict timelines: notice within 30 days of the return memo, 15 days for the drawer to pay, and a complaint within the following month. That complaint can run alongside the council claim. Our page on MSME litigation and court cases covers the court routes.
When Should You Not File a Disputed Claim on Samadhaan?
Do not file on Samadhaan where the manufacturer registered on Udyam after the orders, is classified as medium, supplied traded products, or knows the disputed batches genuinely failed. Avoid it too where the distributor is already in insolvency or where a regulatory investigation could be affected by statements made in the claim.
The regulatory point is serious. If a batch is the subject of a drug regulator's inquiry, anything the manufacturer files in a payment dispute could be read alongside that inquiry. The manufacturer should take regulatory advice first and ensure that the payment claim does not contain statements inconsistent with its regulatory position.
Honest limit: if the dispute is mainly about one large batch that failed in an independent laboratory and your retained sample also shows a borderline result, a council claim is unlikely to recover that invoice. Negotiate a shared loss on that batch and file for the rest.
Small disputes with long-standing distributors are another case where filing may not help. A balance under ₹50,000 tied to a single disputed batch is usually better resolved by a meeting and a credit note on agreed terms. Keep the council route for larger balances where the distributor refuses to engage. Suppliers who want to understand the dispute side more broadly can read our page on the MSME Samadhaan dispute lawyer.
Why Hire Advocate BK Singh for MSME Samadhaan Dispute Filing?
Because a disputed claim needs careful filing at every stage, and Advocate BK Singh prepares, files and pursues these claims with the Legals365 team behind each matter.
- MSME and MSEFC practice. Delayed-payment claims under the MSMED Act, 2006 are a regular part of his work. He knows how councils weigh timely objections and competing test results.
- Filing with the dispute in view. He structures the application so that it meets the buyer's objections from the start. That avoids rework when the matter reaches arbitration.
- Evidence discipline. He advises on preserving retained samples, batch records and electronic evidence before they are lost. In quality disputes, that preparation often decides the outcome.
- Arbitration experience. Council arbitration follows the Arbitration and Conciliation Act. He handles pleadings, expert evidence and counterclaims for recall or lost sales.
- Recovery and commercial litigation. Where a cheque bounce complaint or commercial suit is needed alongside the council claim, he handles both.
- Court practice. He appears before commercial courts, High Courts and the Supreme Court, and before DRT, DRAT and NCLT, for challenges, enforcement and insolvency issues.
- Technical comfort. His MCA, LLB and LLM qualifications help in handling data-heavy records and electronic evidence that pharma disputes generate.
- Team support and candour. Legals365 has over 50 advocates, and he tells clients plainly which invoices are worth filing and which are not.
How Do You Start a Disputed Filing?
Hold your retained samples, collect batch records, certificates of analysis, dispatch documents, purchase orders, invoices and the distributor's complaint letters, and ask an MSME Samadhaan dispute filing lawyer to review them. A review before filing separates strong invoices from weak ones, protects evidence and sets out the filing sequence so the claim holds up at each stage.
Disputes do not improve with silence. Evidence ages, samples reach disposal dates and limitation runs on older invoices. If a distributor or marketing company is refusing to pay on quality grounds, you can hire Advocate BK Singh for MSME, recovery, commercial and arbitration cases. He meets clients at the Vaishali (Ghaziabad) and Dwarka (New Delhi) offices, and manufacturers in other states can begin with a remote review. More on the advocate is available on the Advocate BK Singh profile.
Official sources: the MSME Samadhaan portal, the Udyam registration portal, and India Code for the MSMED Act, 2006.
Speak to Advocate BK Singh
Share your invoices, purchase orders, delivery records and correspondence for an initial review of your matter.
Advocate BK Singh | Legals365 | Phone/WhatsApp: +91 98115 61566 | Offices: Vaishali (Ghaziabad) and Dwarka (New Delhi)
Frequently Asked Questions
Who is the best MSME Samadhaan dispute filing lawyer?
The best MSME Samadhaan dispute filing lawyer is one who files with the buyer's objections in mind and can manage every later stage, from conciliation to arbitration and enforcement. Advocate BK Singh of Legals365 handles disputed filings for micro and small manufacturers, including pharma contract manufacturers. Look for experience with quality disputes and council arbitration rather than promises about results.
Why should I hire Advocate BK Singh for MSME Samadhaan dispute filing?
Because disputed claims need more than a form. Advocate BK Singh advises on preserving retained samples and batch records, structures the application to meet the buyer's objections, files each stage with the right documents and handles counterclaims in arbitration. His Legals365 team of over 50 advocates supports drafting and hearings, and he advises frankly on which invoices are worth pursuing.
Can Advocate BK Singh handle MSME, recovery, commercial and arbitration cases together?
Yes. Advocate BK Singh handles MSMED Act claims, commercial recovery suits, cheque bounce complaints and arbitration matters, and can run them together where needed. A contract manufacturer may need a council claim, a Section 138 complaint for stopped cheques and later execution of the award. One advocate across all of them keeps the facts and strategy consistent.
Can I file on MSME Samadhaan if my buyer has disputed the quality of goods?
Yes. A quality dispute does not stop a Samadhaan filing. The Facilitation Council conciliates and, if needed, arbitrates the dispute to decide what is payable. The council will examine whether the objection was made in writing within fifteen days of delivery and whether the buyer's evidence holds up against the manufacturer's records and test results.
Does a buyer's quality complaint stop the 45-day payment period?
Only a written objection made within fifteen days of delivery prevents deemed acceptance under Section 2(b) of the MSMED Act. A complaint raised months later, after the buyer has sold or used the goods, usually does not stop the 45-day period under Section 15. Even a timely objection is tested on its merits by the council.
Is a pharma contract manufacturer eligible for MSME Samadhaan?
Yes, if it is a micro or small enterprise registered on Udyam before the supply orders and it manufactured the goods itself. It does not matter that the distributor owns the brand or holds a loan licence. Products sourced from another plant and resold are trading supplies and are generally outside the delayed-payment provisions of the MSMED Act.
What should a contract manufacturer preserve before filing a disputed claim?
Preserve retained or control samples, batch manufacturing records, certificates of analysis, release documents, dispatch and transport records, the buyer's goods receipt notes, test reports and all correspondence about the objection. Stop routine disposal of retained samples once a dispute begins, and record that instruction in writing. Lost evidence cannot be recreated later. Photograph the sample storage area and keep the logbook entries safe.
What documents are filed at each stage of a disputed Samadhaan claim?
The online application needs the Udyam certificate, purchase orders, invoices, dispatch records and the demand notice. Conciliation needs a note answering objections with certificates of analysis. The statement of claim adds the supply and quality agreements, batch records and interest computation. The rejoinder adds retained sample results, and evidence is given through affidavits of the quality head and others.
Why do disputed MSME Samadhaan filings get delayed or rejected?
Common reasons include a Udyam date after the orders, traded products mixed with manufactured ones, the wrong buyer entity, invoice amounts not matching the ledger, missing or unindexed documents, invoices beyond limitation, and including batches the manufacturer knows failed. A filing that has no ready answer to the buyer's objections also tends to stall at conciliation.
Should I offer a joint test when a distributor rejects a batch?
Yes, in most cases. Offering a joint test on retained samples at an agreed independent laboratory shows good faith and often settles the dispute. If the distributor refuses, that refusal weakens its objection and can be relied on before the council. Make the offer in writing, specifying the samples, the laboratory and how costs will be shared.
How much interest accrues on a disputed MSME claim?
Interest under Section 16 continues throughout the dispute, compounded monthly at three times the RBI Bank Rate, currently 17.25% a year. On ₹14,14,500, interest after one year is about ₹2,64,248 and after two years about ₹5,77,860. If some batches are found validly rejected, interest on those invoices falls away while the rest continues. Separating disputed from undisputed invoices keeps that calculation clean.
Can a distributor claim recall costs as a counterclaim in the MSEFC case?
Yes. The Supreme Court in Silpi Industries held that counterclaims are maintainable in council arbitration. A distributor may claim recall costs, lost sales or regulatory penalties. Each element must be proved with documents and linked to the manufacturer's fault. Many recall cost claims are inflated or poorly documented, and they can be challenged on causation and quantum.
What if a drug regulator declared my batch not of standard quality?
Treat it seriously and take regulatory advice first. Check whether the sample relates to the batch in question, whether storage in the supply chain could explain the result, and whether the report can be contested under the applicable procedure. Make sure nothing filed in the payment dispute is inconsistent with your regulatory position, since both may be read together.
Can I claim the conversion charge if the distributor supplied the API?
Yes. Where the distributor supplied the active ingredient or packaging material and paid the manufacturer a conversion charge, that charge is payment for manufacturing and qualifies under the MSMED Act. Frame the claim around the amounts actually billed. Be ready to address material reconciliation, as distributors often deduct for consumption beyond agreed yield norms. Keep the material reconciliation statements ready for the council.
Can a distributor return near-expiry stock and refuse to pay?
Only if the contract allows returns on those terms. Slow sales are generally the distributor's commercial risk. If the goods met the agreed shelf life on delivery and no timely objection was made, the invoice amount remains due. Ask for the return clause before conceding any credit, and resist blanket returns that the contract does not support.
Is there a limitation period for filing a disputed Samadhaan claim?
Yes. The Supreme Court in Silpi Industries held that the Limitation Act applies to arbitration under Section 18 of the MSMED Act. Claims generally need to be brought within three years of the due date, unless a written acknowledgement or part payment extends the period. Check running accounts with distributors carefully for older invoices that may be time-barred.
Which council hears a claim by a pharma contract manufacturer whose plant is in another state?
Section 18(4) allows the supplier to approach the Facilitation Council where the supplier is located. A plant in Himachal Pradesh supplying a distributor in Delhi can file before the Himachal council. Advocate BK Singh appears before councils for Delhi, Uttar Pradesh and Haryana and works with associate advocates for matters in other states. The distributor must answer the claim before that council.
Can I file a cheque bounce case and a Samadhaan claim together?
Yes. If the distributor stopped or dishonoured cheques for past supplies, a Section 138 complaint can be filed for the cheque amount, following the strict timelines of notice within 30 days and complaint within the following month after the 15-day payment period. It can run alongside the council claim, with credit given for any payment received in either proceeding.
When should a manufacturer not file a disputed claim on Samadhaan?
Avoid filing where the manufacturer registered after the orders, is classified as medium, supplied traded products, or knows the disputed batches genuinely failed. Also take care where a regulatory inquiry is pending or the distributor is in insolvency. In those cases, negotiation, a commercial suit, or a claim before the resolution professional may be more appropriate.
Does a quality agreement affect a disputed MSME claim?
Yes, often significantly. A quality agreement sets out testing responsibilities, specifications, release procedures and how out-of-specification results are handled. If the distributor rejected a batch without following the agreed procedure, that failure strengthens the manufacturer's case. Attach the quality agreement to the statement of claim and point to the clauses the distributor did not follow.
Disclaimer: This page gives general information in line with the Bar Council of India Rules. It is not legal advice or a solicitation, and the outcome of any matter depends on its own facts and evidence.
MSME Msme Samadhaan Dispute Filing Lawyers?
Get strategic legal guidance from experienced consumer dispute lawyers who help individuals and businesses in Msme Samadhaan Dispute Filing Lawyers resolve MSME matters, insurance disputes, real estate conflicts, and defective service claims with confidence and clarity.
Chat on WhatsApp +91-9811561566Schedule Your Consultation