The owner of a small CNC precision machining shop has a call scheduled with his customer's purchase head on Thursday. The customer, a hydraulic equipment maker, owes him ₹3,12,000 across six invoices for machined spools and end caps. Three weeks after one delivery, it rejected a lot for an oversized bore and has held every payment since. Now it offers 70% of the outstanding amount, in two instalments, if he withdraws his MSME Samadhaan application and keeps supplying at the old rates. He wants the customer. He also wants his money. MSME Samadhaan dispute resolution, for him, is not an abstract topic. It is a decision he has to make this week.
Most delayed-payment claims end in a settlement, not an award. The question is whether the settlement is a good one, and whether it is written so that it actually gets paid. An experienced advocate helps with both: valuing the offer against what the council is likely to award, and drafting terms that protect the supplier if the buyer slips again. If the claim needs to go further, you can hire Advocate BK Singh for MSME, recovery, commercial or arbitration cases.
Key facts at a glance
- The MSEFC first tries conciliation and only then moves to arbitration (Section 18).
- Settlement can happen at any stage: before filing, at conciliation or during arbitration.
- A rejection not made in writing within fifteen days of delivery does not prevent deemed acceptance (Section 15).
- Interest runs at three times the RBI Bank Rate, compounded monthly; 17.25% a year from 7 October 2026.
- A settlement recorded before the council is far easier to enforce than a phone promise.
- If a buyer challenges an award, it must first deposit 75% of it (Section 19).
What Does MSME Samadhaan Dispute Resolution Actually Involve?
MSME Samadhaan dispute resolution involves choosing between negotiation, a demand notice, council conciliation and arbitration, and deciding at each point whether an offer is worth taking. It also involves drafting settlement terms with dates, amounts, a default clause and a record before the council, so that the supplier is not left with an unenforceable promise.
The process under Section 18 of the MSMED Act, 2006 is designed to encourage settlement. The council first conducts conciliation, itself or through an institution, under the conciliation provisions of the Arbitration and Conciliation Act, 1996. Only if conciliation fails does it arbitrate. That structure gives both sides an early chance to end the dispute on terms they choose.
For the supplier, dispute resolution is a series of judgement calls. Is the buyer's objection genuine. What is it costing to keep the claim alive. What would an arbitrator probably award. Can the buyer pay. Does the relationship have future value. The answers point towards settling or pressing on. For a broader look at resolution options, see MSME Act dispute resolution.
Which Settlement Paths Are Open Before and After Filing?
Before filing, the paths are direct negotiation and a demand notice followed by negotiation. After filing, the main path is conciliation at the council. During arbitration, the parties can still settle and ask for the terms to be recorded as an award on agreed terms. Each later path carries more formality and more enforcement power.
Direct negotiation
The owner talks to the buyer's purchase or accounts head. This is quick and preserves the relationship. It works best when the buyer's delay is about cash flow rather than a real dispute. Its weakness is that any agreement is informal unless it is written down properly.
Notice and negotiation
A notice from an advocate, citing Sections 15 and 16 and Section 43B(h), changes the tone. The buyer's finance team now knows that interest at three times the Bank Rate is running and that a delayed payment beyond the Section 15 period affects the buyer's own tax deduction. Many buyers respond with a payment plan.
Conciliation at the council
Once the application is filed and notice issued, the council brings the parties together. The conciliator hears both sides and helps them reach terms. A settlement reached here can be recorded, which gives it real force.
Settlement during arbitration
Even after conciliation fails, parties often settle once pleadings are filed and each side sees the other's evidence. The arbitral tribunal can record the settlement as an award on agreed terms, which is enforceable like any other award.
How Should You Prepare for a Settlement Call With the Buyer?
Prepare for a settlement call by knowing your full figure with interest, the undisputed part of the claim, your minimum acceptable outcome, and the terms you need on dates, mode of payment and default. Listen more than you speak, agree nothing final on the call, and ask for any offer in writing so it can be checked.
The machining shop owner's call on Thursday is typical. The purchase head will be friendly, mention future orders and suggest that a quick compromise suits everyone. That may be true. It may also be a way to close the matter cheaply. A little preparation changes the conversation.
- Have the one-page schedule in front of you: six invoices, their due dates, the balance and interest to date.
- Know which invoices are not disputed at all. Five of the six are for parts that passed the buyer's own incoming inspection. Ask for those to be paid first, whatever happens with the rejected lot.
- Know what the rejected lot is worth and what a fair credit might be if part of it was genuinely out of tolerance.
- Decide in advance the lowest overall figure you would accept, and the shortest payment period.
- Separate future business from this claim. Say plainly that you want to keep supplying, but on terms that do not depend on giving up money already earned.
End the call by asking the buyer to put its proposal in an email. A written offer can be valued calmly and compared with the interest table. It also becomes part of the record, which helps if the buyer later denies having made it or tries to withdraw it at conciliation.
How Does Council Conciliation Work, and What Tactics Help?
At conciliation, the council or its appointed conciliator meets the parties, hears each side's position and helps them explore terms. Tactics that help include arriving with a clear claim schedule and interest sheet, answering the buyer's main objection with documents, knowing your minimum figure in advance, and proposing concrete terms rather than waiting for the buyer to make an offer.
Conciliation is not a hearing in the usual sense. There are no witnesses and no cross-examination. It is a structured negotiation with a neutral person in the room. That neutral person matters, because buyers who would ignore a supplier's demand often respond differently when a council conciliator asks them why they have not paid.
Practical tactics from experience:
- Bring one page. A single-page summary with invoices, due dates, payments, balance and interest to date. Conciliators appreciate a figure they can follow.
- Deal with the main objection directly. For the machining shop, that means the rejected lot: the delivery date, the date of rejection, the inspection report sent with the goods, and whether the parts were in fact used.
- Separate the disputed from the undisputed. If one lot is genuinely in question, propose that the undisputed invoices be paid at once while the disputed lot is examined. Buyers often agree, and the supplier is paid most of its money quickly.
- Make the first concrete proposal. The party that puts specific terms on the table often shapes the discussion.
- Do not reveal your minimum. Know it, but keep it to yourself and your advocate.
Practical tip: before conciliation, ask your floor supervisor or quality inspector to write a short dated note of what happened with any disputed lot. Memories fade quickly, and the conciliator may ask questions that only the person on the shop floor can answer.
When Should You Settle, and When Should You Press for Arbitration?
Settle when the buyer's objection has some merit, when the buyer's finances make a long fight risky, when the offer pays most of the principal quickly, or when the relationship is worth more than the interest. Press for arbitration when the buyer's defence is weak, the buyer can pay, the offer ignores interest entirely, or the buyer has a pattern of delaying other suppliers.
The decision is rarely clean. A few questions help frame it:
- How strong is the buyer's objection. If a lot really failed inspection and the buyer told you within fifteen days, a reduction is fair. If the rejection came three weeks later with no report, it is weak.
- What will an arbitrator likely award. Principal plus Section 16 interest on the undisputed invoices, and possibly on the disputed lot if acceptance is proved.
- How long will it take. Councils vary. A contested arbitration may take many months.
- Can the buyer pay now, and will it be able to pay later. A struggling buyer may have less to pay with after a long case.
- What is the customer worth over the next three years. For a job shop, a steady customer can be worth far more than one claim.
- What message does settling send. A buyer who learns that you will always accept 70% may start paying 70% as a matter of course.
The last point is easy to overlook. Some buyers deliberately delay small suppliers, knowing most will accept a discount to get paid. Settling every time at a steep discount teaches the buyer that delay works.
How Should a Small Claim of ₹3,12,000 Be Handled?
A small claim should be handled in proportion to its size. The council route still offers statutory interest and costs the supplier relatively little to pursue. But time spent on a long contest may outweigh the amount. The right approach is usually to press firmly for the undisputed amount with interest and be flexible on the genuinely disputed part.
At ₹3,12,000, the claim sits just above the ₹3 lakh level at which the Commercial Courts Act applies and pre-institution mediation under Section 12A becomes mandatory before a commercial suit. That makes the council comparatively attractive: it begins with conciliation anyway, and an eligible supplier gets Section 16 interest without first going through a separate mediation stage.
Proportion also shapes the evidence. For a large claim, an independent metrology report on the disputed parts may be worth commissioning. For a lot worth perhaps ₹40,000, it is usually not. The better course is to rely on the inspection report sent with the goods, the buyer's own acceptance or use of the parts, and the timing of the rejection.
The owner's own time is a cost too. Every visit to the council is a day away from the shop. An advocate who can attend most hearings and call the owner in only for conciliation, where his decisions are needed, keeps the claim proportionate.
How Is a Rejection Dispute in Precision Machining Resolved?
A rejection dispute is resolved by looking at the drawing and tolerance agreed, the inspection report sent with the goods, the date and form of the rejection, whether the buyer used or reworked the parts, and whether the defect, if real, was the supplier's fault. Most such disputes settle once both sides look at the same records together.
In precision machining, the drawing is the contract. It fixes the bore diameter and its tolerance, surface finish, and any geometric tolerances such as concentricity. The supplier's first-article inspection and lot inspection reports, often from a coordinate measuring machine or bore gauges, show what was measured before dispatch.
The buyer's rejection should identify the parts, the measurement taken, the instrument used and the date. A rejection that says only "bore oversize, lot rejected", sent three weeks after delivery, is weak. If the buyer has meanwhile assembled some of those parts into its products, the rejection is weaker still.
A practical way to resolve it is a joint inspection of retained samples, or of the rejected parts if the buyer still has them. Many disputes disappear when both quality teams measure the same part with the same gauge. Others reveal a genuine issue, perhaps a tool wear problem on a particular shift, in which case a fair credit for the affected parts is the honest answer. Either way, the disputed amount is separated from the undisputed invoices, which should be paid regardless.
How Much Interest Does ₹3,12,000 Attract?
Section 16 interest on ₹3,12,000 runs at three times the RBI Bank Rate, compounded monthly from the due date. At the 5.75% Bank Rate from 7 October 2026, the annual rate is 17.25%. After one year the interest is ₹58,286, and after two years it is ₹1,27,460, taking the total to ₹4,39,460.
The steps in between: after six months, interest of ₹27,896 brings the total to ₹3,39,896. After twelve months the total is ₹3,70,286. At eighteen months the interest is ₹91,393 and the total ₹4,03,393. For a small shop, those are real sums, and they shape the settlement discussion. The buyer's offer of 70% of the principal, about ₹2,18,400, looks quite different when set against a total claim that would be well over ₹3,70,000 after a year.
| Period after the due date | Growth factor | Interest (₹) | Total due (₹) |
|---|---|---|---|
| 6 months | 1.0894 | ₹27,896 | ₹3,39,896 |
| 12 months | 1.1868 | ₹58,286 | ₹3,70,286 |
| 18 months | 1.2929 | ₹91,393 | ₹4,03,393 |
| 24 months | 1.4085 | ₹1,27,460 | ₹4,39,460 |
Principal ₹3,12,000. Interest compounded monthly at three times the RBI Bank Rate (5.75% from 7 October 2026), that is 17.25% a year or 1.4375% a month. Check the Bank Rate in force for your period.
A sensible settlement often trades interest for speed: full principal on the undisputed invoices within a short time, with interest waived only if the payment is made on schedule. For the calculation method, see MSME delayed payment interest.
How Should Settlement Terms Be Drafted?
Settlement terms should state the exact amount, the payment dates, the mode of payment, what happens to interest, what happens if the buyer defaults, which claims are settled, and when the council application will be withdrawn. Withdrawal should follow actual receipt of payment, not precede it. Terms should be recorded before the council wherever possible.
- State the amount precisely. Name the invoices covered and the total payable. Avoid phrases such as "around" or "approximately".
- Fix the dates. Give calendar dates for each instalment, not "within a month" or "after our customer pays".
- Specify the mode. Bank transfer to a named account, or post-dated cheques handed over at signing. Cheques add the protection of the Negotiable Instruments Act if they are dishonoured.
- Make the interest waiver conditional. Interest is waived only if every instalment is paid on time. On default, the full claim with interest revives.
- Include a default clause. If any instalment is missed, the entire balance becomes payable at once and the supplier may proceed before the council or enforce the recorded terms.
- Define what is settled. Say whether the settlement covers only these invoices or all claims between the parties, and whether the disputed lot is included.
- Withdraw only after payment. The application is withdrawn, or the matter closed, once the final payment has cleared. Until then, the proceedings stay alive.
- Record before the council. Ask the council to record the settlement, so that the terms carry the council's authority and can be enforced if broken.
The buyer's offer to the machining shop failed most of these tests. It asked for withdrawal first, payment later, with no default clause and no dates. Redrafted along these lines, a settlement at a modest discount could be a reasonable outcome.
What If the Buyer Defaults on the Settlement?
If the buyer defaults on a settlement recorded before the council, the supplier can enforce the recorded terms or revive the full claim, depending on how the settlement was worded. If the settlement was informal and the application had already been withdrawn, the supplier may have to start again, which is why withdrawal should always follow payment.
Default is common. A buyer that delayed once often delays again. That is the main reason to insist on a written, recorded settlement with a default clause, and post-dated cheques where possible. A dishonoured post-dated cheque given under a settlement can found a complaint under Section 138 of the Negotiable Instruments Act, subject to its strict timelines: notice within 30 days of the return memo, fifteen days for the drawer to pay, and a complaint within the following month.
Where the settlement was recorded as an award on agreed terms during arbitration, it is enforceable as a decree under Section 36 of the Arbitration and Conciliation Act, 1996. That is the strongest form a settlement can take.
Can You Keep the Customer While Pursuing the Claim?
You can often keep the customer, provided the claim is handled professionally and the communication stays businesslike. Many buyers continue to place orders while a council matter is pending, especially when the dispute is about one lot or one period. Separating the commercial relationship from the claim, and saying so, helps.
The owner of a job shop fears that filing will end the relationship. Sometimes it does. More often, it changes the terms of the relationship: the buyer pays new invoices on time while the old ones are resolved. Some suppliers agree with the buyer, openly, that new orders will be supplied on shorter credit or against advance payment until the old dues are cleared. That protects the supplier from adding to its exposure.
The council route can actually help the relationship. It moves the discussion away from personal pressure between the owner and the purchase head and into a neutral forum. Neither side has to back down in front of the other; both can accept a conciliator's suggestion. Our page on MSME dispute resolution discusses this further.
How Do the Resolution Paths Compare?
The resolution paths differ in formality, speed, cost and enforceability. Direct negotiation is fastest but informal. A notice adds weight. Council conciliation adds a neutral forum and a record. Arbitration gives a binding award with the 75% deposit protection. Mediation under Section 12A is a precondition only if the supplier chooses a commercial suit instead.
| Path | Binding outcome | Best when | Main risk |
|---|---|---|---|
| Direct negotiation | Only if written and signed | Cash-flow delay, good relationship | Informal promises not kept |
| Demand notice then talks | Only if written and signed | Buyer needs a firm signal | Buyer uses the time to prepare defences |
| MSEFC conciliation | Recorded settlement | Partial dispute, buyer willing to talk | Pressure to accept too low an offer |
| MSEFC arbitration | Award enforceable as a decree | Weak defence, buyer able to pay | Time taken; counterclaims |
| Section 12A mediation and commercial suit | Settlement or decree | Supplier not eligible under the MSMED Act | Slower; no Section 16 interest |
For the machining shop, eligible under the Act and with a modest claim, council conciliation is the natural forum. If the shop had registered on Udyam only after the buyer's purchase order, the analysis would shift, and a commercial court case lawyer would look at mediation and suit instead.
What Are the Honest Limits of Samadhaan Dispute Resolution?
Samadhaan dispute resolution cannot help a supplier registered after the contract, a medium enterprise, or a trader. It cannot force a buyer to settle; it can only create the conditions for settlement and, failing that, an award. Against a buyer with no assets, even a good award may be hard to collect.
There is also the question of time. Councils carry heavy lists. A supplier who needs money next month will not get an award next month. In that situation, a reasonable settlement now may be worth more than a better award later, and an honest adviser will say so. Equally, a supplier who can afford to wait, against a buyer who can afford to pay, is often better served by pressing on. That is the kind of judgement many owners hire Advocate BK Singh to make with them, because it depends on reading both the law and the buyer.
Finally, if the buyer enters corporate insolvency, the moratorium halts council proceedings, and the supplier's claim goes to the resolution professional. Settlements reached shortly before insolvency can also face scrutiny. Watch for signs of distress and act early. For the conciliation and arbitration stages in more depth, see MSEFC arbitration and conciliation cases.
Why Hire Advocate BK Singh for MSME Samadhaan Dispute Resolution?
Because good settlements come from knowing what an arbitrator would award, what the buyer can pay and how to write terms that hold, and that requires an advocate who handles every stage.
- Realistic valuation of offers. Each offer is weighed against the likely award, the interest table and the buyer's position. You know what you are giving up before you agree.
- Conciliation preparation. One-page summaries, answers to the main objection and a clear minimum figure are prepared in advance. The supplier walks in organised.
- Settlement drafting that protects. Dates, amounts, conditional interest waivers and default clauses are written in. Withdrawal is tied to payment, and terms are recorded before the council.
- MSMED Act and MSEFC experience. Delayed-payment claims and council proceedings are regular work. The structure of Section 18 is used to the supplier's advantage.
- Ready for arbitration if talks fail. Pleadings, evidence and arguments are handled by the same advocate. Advocate BK Singh appears before the Supreme Court, High Courts, DRT and DRAT, NCLT and commercial courts.
- Recovery and commercial litigation as backup. If a settlement cheque bounces or the buyer defaults, a Section 138 complaint or enforcement follows without delay.
- Proportionate handling. Small claims are handled in proportion, with the owner's time protected and evidence matched to the amount at stake.
- Qualifications and team. He holds MCA, LLB and LLM degrees, and Legals365's team of 50+ advocates supports hearings, including before councils outside Delhi NCR through associates.
Before Thursday's Call
If a buyer has made you an offer, do not accept or reject it on the phone. Take a day, set the offer against your interest figures and your evidence, and get advice on the terms. MSME Samadhaan dispute resolution works best when the supplier decides with full information and puts every agreement in writing.
Suppliers across Delhi NCR, and elsewhere through our associate advocates, can hire Advocate BK Singh for MSME, recovery, commercial or arbitration cases from the Vaishali (Ghaziabad) and Dwarka (New Delhi) offices, with consultations in person, by phone or by video. More about his practice is on the Advocate BK Singh profile.
Official sources: the MSME Samadhaan portal, the Ministry of MSME and India Code for the MSMED Act, 2006 and the Arbitration and Conciliation Act, 1996.
Speak to Advocate BK Singh
Share your invoices, purchase orders, delivery records and correspondence for an initial review of your matter.
Advocate BK Singh | Legals365 | Phone/WhatsApp: +91 98115 61566 | Offices: Vaishali (Ghaziabad) and Dwarka (New Delhi)
Frequently Asked Questions
Who is the best lawyer for MSME Samadhaan dispute resolution?
The best lawyer for MSME Samadhaan dispute resolution is one who can value a settlement offer against the likely award, draft terms that protect the supplier, and take the matter to arbitration if talks fail. Advocate BK Singh of Legals365 advises micro and small suppliers at every stage of council proceedings. Choose on experience and judgement, not on promises of a particular outcome.
Why should I hire Advocate BK Singh for resolving a Samadhaan payment dispute with my buyer?
You should hire Advocate BK Singh because settlement decisions depend on knowing what the council would probably award and how to make the buyer keep its word. He prepares for conciliation, values each offer honestly, drafts settlement terms with dates and default clauses, and handles arbitration, cheque bounce complaints or enforcement if the buyer does not pay as agreed.
Can Advocate BK Singh handle MSME, recovery, commercial and arbitration cases together?
Yes. Advocate BK Singh and the Legals365 team handle MSMED Act claims, recovery proceedings, commercial suits, cheque bounce complaints and arbitration as connected work. A settlement may involve post-dated cheques, a recorded council settlement and, if things go wrong, enforcement or a Section 138 case. One team handling all of these keeps the strategy consistent from offer to payment.
Should I accept 70% of my dues to settle an MSME Samadhaan case?
It depends on the strength of the buyer's objection, its ability to pay, how quickly the money would come and the value of the relationship. Compare the offer with principal plus Section 16 interest. If the buyer's defence is weak and it can pay, 70% of principal alone is usually low. If part of the claim is genuinely disputed, a discount may be fair.
Can I settle with the buyer after filing on Samadhaan?
Yes. Settlement is possible at any stage, including after filing, at conciliation and during arbitration. The council's process begins with conciliation precisely to encourage settlement. Put the terms in writing, ask the council to record them, and withdraw or close the matter only after payment has actually been received, so that you are not left without a remedy.
What happens at MSEFC conciliation?
The council or an appointed conciliator meets both parties, hears their positions and helps them find terms both can accept. There are no witnesses or cross-examination. If the parties agree, the settlement is recorded. If they do not, the council moves to arbitration under the Arbitration and Conciliation Act, 1996, and the matter is decided on evidence.
The buyer wants me to withdraw my Samadhaan application before paying. Should I?
No. Withdrawal should follow payment, not precede it. If you withdraw first and the buyer does not pay, you may have to start again and lose time, possibly with limitation problems. Agree the terms, have them recorded before the council if possible, and close the matter only once the final payment has cleared into your account.
How do I handle a rejected lot in a machining payment dispute?
Separate the rejected lot from the undisputed invoices, which should be paid regardless. Then look at the drawing, your inspection report, the date and detail of the rejection, and whether the buyer used the parts. A joint inspection of retained samples often resolves the issue. If a genuine defect is found, offer a fair credit for the affected parts only.
Is a rejection made three weeks after delivery valid under the MSMED Act?
Under Section 15, goods are deemed accepted if the buyer does not object in writing within fifteen days of delivery. A rejection made three weeks later does not prevent deemed acceptance, though the buyer may still raise the defect as a counterclaim. Its weight depends on the evidence. Use of the parts in production weakens a late rejection considerably.
Is MSME Samadhaan worth it for a claim of about three lakh rupees?
Often, yes. The council route gives statutory interest, begins with conciliation, and does not require the separate pre-institution mediation that a commercial suit of ₹3 lakh or more needs under Section 12A. Handle the claim in proportion: rely on existing documents, avoid expensive expert reports for small disputed items, and focus on recovering the undisputed amount with interest.
What should a settlement agreement in an MSME dispute include?
It should state the exact amount and invoices covered, calendar dates for each payment, the mode of payment, that any interest waiver applies only if payments are on time, a default clause reviving the full claim, which claims are settled, and that the council matter will be closed only after full payment. Recording it before the council adds enforceability.
What if the buyer breaks a settlement recorded before the council?
You can enforce the recorded terms or revive the full claim, depending on the wording. A default clause making the whole balance payable at once, with interest restored, is very useful. If the settlement was recorded as an award on agreed terms during arbitration, it is enforceable as a decree under Section 36 of the Arbitration and Conciliation Act, 1996.
Should I take post-dated cheques in an MSME settlement?
Post-dated cheques add useful protection. If one is dishonoured, you may file a complaint under Section 138 of the Negotiable Instruments Act, subject to its timelines: notice within 30 days of the return memo, fifteen days for the drawer to pay, and a complaint within the following month. Keep the settlement document referring to the cheques along with them.
Can I keep supplying a buyer while my Samadhaan case is pending?
Yes, many suppliers do. To limit risk, consider supplying new orders on shorter credit or against advance payment until the old dues are cleared, and say so clearly in writing. Keep new invoices separate from the claim. The council process can actually help the relationship by moving the payment discussion into a neutral forum rather than personal pressure.
When should I refuse a settlement and go to arbitration?
Refuse when the buyer's defence is weak, the buyer can clearly pay, the offer ignores interest entirely or stretches payments over a long period, or the buyer has a habit of delaying suppliers and settling at a discount. Arbitration takes longer, but an award carries Section 16 interest and the 75% deposit requirement if the buyer challenges it.
Does a settlement have to include Section 16 interest?
No. Parties are free to settle on any terms, including waiving some or all interest. The interest entitlement is useful as a bargaining point. A common approach is to waive interest only on condition that the principal is paid promptly and in full, with the interest reviving if the buyer defaults. Never give up interest without getting something concrete in return.
Can the buyer raise new defences during conciliation?
The buyer can raise any point it likes during conciliation, since it is a negotiation rather than a trial. New defences raised for the first time at this stage, long after delivery and billing, usually carry less weight if the matter goes to arbitration. Note them, ask for any documents the buyer relies on, and respond in writing afterwards.
What if the buyer goes into insolvency during my Samadhaan dispute?
If the buyer is admitted into corporate insolvency resolution, a moratorium stops the council proceedings, and your claim must be filed with the resolution professional. Settlements made shortly before insolvency can also face scrutiny. Watch for warning signs such as missed salaries, closed sites or other suppliers chasing the buyer, and act promptly to secure payment or security.
Can a settlement cover only the undisputed invoices?
Yes, and this is often a sensible approach. The buyer pays the undisputed invoices promptly, and the disputed lot is either examined jointly, settled separately, or left for the council to decide. This gets most of the money to the supplier quickly and narrows the dispute. Record clearly which invoices are settled and which remain open.
Do I need to attend MSEFC conciliation personally?
It is usually wise for the owner or a senior decision-maker to attend conciliation, because settlement decisions are made there and the conciliator may ask factual questions. An advocate can attend other hearings on your behalf. Before the meeting, agree your minimum figure and the terms you need with your advocate, so you can respond confidently to offers.
Disclaimer: This page gives general information in line with the Bar Council of India Rules. It is not legal advice or a solicitation, and the outcome of any matter depends on its own facts and evidence.
MSME Msme Samadhaan Dispute Resolution Lawyers?
Get strategic legal guidance from experienced consumer dispute lawyers who help individuals and businesses in Msme Samadhaan Dispute Resolution Lawyers resolve MSME matters, insurance disputes, real estate conflicts, and defective service claims with confidence and clarity.
Chat on WhatsApp +91-9811561566Schedule Your Consultation